General:
The new generation VERLINDE electric chain hoist VX for loads from 63 to 10,000 kg.
Standard equiped with:
• Height of lift 6 m. (other lifting heights possible)
• Standard Control cable 5.5 mtr.
• 2 hoisting speeds.
• Safety limit switch for upper & lower position.
• IP55 hoisting & travelling motor protection.
• Load chain galvanized.
• 2 buttons pendant for hook suspended hoist
or manual trolley.
• 4 buttons pendant for hoist with electric trolley.
• Power supply 400V/3Ph/50Hz or 415V/3Ph
50 Hz or 460V/3Ph /60 Hz.
• Low voltage control 48 V.
• Torque limitor.
• Chain collector.
• Emergency stop button mushroom type.
• Variable travelling speed (for hoist with electric trolley)
• Complies with the CE machine directive.
Optional:
• Non standard power supply (ex. : 230 3ph).
• ACF board for direct control hoist.
• Hard wired control (48V).
• Stainless steel lifting chain and hook.
• Self locking hook.
• Time meter.
• Radio remote control.
• Pendant with 4 or 6 buttons.
• Key switch on pendant.
• Travel limit switches.
• Non standard length on power supply cable.
• Non standard power supply plug (4 or 5 poles).
• Rain cover.
• Brake manual release.
• Food contact oil (NSF H1).
• Gear limit switches 2 or 4 steps.
Available versions (on request):
• Fixed hoist suspended by hook.
• Hoist on monorail push trolley.
• Hoist on monorail motorized trolley.
- Marking: CE-marked




Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.