Working at height and confined spaces: guaranteed safety and compliance with certified expertise

Fall hazards are one of the greatest risks in your operational environment. Incomplete advice or failing equipment not only leads to life-threatening situations, but also to project downtime, rejection, and legal liability.

Advice that demonstrably ensures safety

With specialized advice from Mennens, you secure safety, demonstrably comply with laws and regulations, and safeguard the continuity of your operations. Our EKH-certified specialists visit your site and look beyond theory: they translate standards and requirements into practical, workable solutions tailored to your situation, people, and equipment.

You receive a thorough analysis and report in line with the highest industry standards, fully compliant with the Working Conditions Act and relevant NEN standards such as NEN-EN 795 and NEN-EN 365. This provides you with clear and demonstrable proof of compliance. The advice is directly applicable on-site and is digitally recorded in Mennens Certif, ensuring all your reports and certificates are available anytime, anywhere.

Working at height advice and why it is crucial for your continuity

Working at height includes all activities where there is a risk of falling, legally defined from 2.5 meters or in situations with increased risk. It requires a mandatory Risk Inventory & Evaluation (RI&E) to implement measures that prevent injury and ensure compliance with the Working Conditions Act.

Proper advice is not a formality, but a strategic decision. It not only protects your employees, but also safeguards your organization from the significant consequences of non-compliance: substantial fines, project delays, and reputational damage. Watch the webinar on safe working at height, recorded with our expert Dirk van Blijswijk.

Our advisory services: from risk assessment to rescue planning

Risk Inventory & Evaluation (RI&E) for roofs and work locations

Our inspector identifies all risks related to accessing and working on your roof or other elevated locations. You receive a clear report outlining the measures needed to ensure safety on a permanent basis. 

Task Risk Analysis (TRA) for specific activities

For project-based or high-risk, repetitive tasks, a TRA provides the solution. We analyze the specific activities and advise on the safest working method and the right equipment, so you stay in control of execution.

Inspection & reporting of permanent fall protection systems (NEN-EN 795)

Are your cage ladders, guardrails, anchor points, or lifeline systems still compliant with the NEN-EN 795 standard? Our EKH specialists inspect existing systems, identify any deficiencies, and advise on the most practical solution for repair or replacement. 

Advice on personal protective equipment (PPE) (NEN-EN 363)

The selection and combination of fall protection harnesses, fall arresters, and lines are essential for safety. Based on the working situation, we advise on the right PPE in accordance with NEN-EN 363—ensuring not only safety, but also comfort in use.

Preparation of a legally required evacuation and rescue plan

You are legally required to have a plan in place to rescue a fallen worker quickly. Emergency services are not always able to respond in time or reach every location. We help you develop a practical and comprehensive rescue plan, including advice on the right equipment and the necessary training.

The Mennens advisory process: 4 steps to demonstrable compliance

1. Intake & planning

We analyze your situation together and schedule an on-site visit anywhere in the Benelux.

2. Inspection & analysis on-site

Our EKH-certified specialist visits your site and assesses the workplace, procedures, and equipment in accordance with applicable NEN standards and Working Conditions legislation.

3. Digital reporting

You receive a clear advisory report with photos and concrete recommendations, immediately available in your personal Mennens Certif portal.

4. Advice & implementation

We review the results with you and advise on the most efficient next steps—whether that involves training, repairs, or the purchase of new equipment.

Your digital proof: all certificates and reports in Mennens Certif

No more searching for loose paperwork during an audit. With Mennens Certif, you have 24/7 online access to all advisory reports, inspection certificates, and the status of all your assets. This is your complete proof of compliance—available anytime, anywhere.

Is your organization working safely at height?

Stop met giswerk en ga voor aantoonbare zekerheid. Breng risico’s helder in beeld en ontvang praktisch advies dat écht werkt. Plan vandaag nog een afspraak met een van onze EKH-specialisten.

Frequently Asked Questions

Fall protection equipment must be inspected at least once a year by a competent person. In addition, inspection is required after every fall. Reference: NEN-EN 365.

Non-compliance can lead to project downtime, substantial fines from the Netherlands Labour Authority, and, in the event of an accident, criminal prosecution. A comprehensive advisory report from a certified party minimizes this risk. 

Yes, a rescue plan is a mandatory part of working at height. You must be able to demonstrate how you can quickly and safely evacuate a colleague who is suspended in a harness. Reference: Working Conditions Decree (Arbobesluit), Article 3.16.

An inspection certificate is generally valid for one year. The exact expiration date is always shown on the product label and is available 24/7 via Mennens Certif.

An RI&E (Risk Inventory & Evaluation) is a broad analysis of all risks within your organization. A TRA (Task Risk Analysis) focuses on the specific risks of a single task or project.

Yes. All our advice is based on current Working Conditions legislation, relevant NEN standards, and EKH guidelines, so you can demonstrate that you have fulfilled your duty of care.