General:
Range of hand spurgear winches from 300 to 2750 kg, models with painted, galvanized or stainless steel frame.
Comply with Machines Directive 2006/42/EC. Developped and manufactured in accordance with standard NF E N 13157.
Use:
•Lifting or pulling/hauling operation
•Flat
•Industry
•Auditoriums, theatre scenery
•Water treatment, water dams
•Sports rooms
•Hanging chandeliers...
Technical characteristics:
•Mechanical parts machined and protected by cataphoresis.
•Stainless steel ratchet spring.
•Straight-cut gears.
•Automatic brake made of composite materials.
•Disengageable drum, no load only, associated with a failsafe system in the rope wind direction (patented).
•Reduction system fully protected by a metal or plastic cover providing maximum safety.
•Ergonomic and removable crank handle with rotating grip. This crank arm can be adjusted to minimise effort according to the loads.
•Captive crank adjusting knob.
•Finition : galvanized, painted or stainless steel frame

Product Image 1
Product Image 2
Select a row from the table below, then click the add to quote button
Part Code A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
K
mm
S
mm
T
mm
CAD
GR1000 410 485 305 300 340 370 - 236 - -
GR1450 410 485 305 300 340 370 - 236 - -
GR2000 510 585 360 400 340 440 - 325 - -
GR2750 510 585 360 400 340 440 - 325 - -
GR300 249 400 190 217 240 200 145 144 184 76
GR500 249 400 190 217 240 200 145 144 184 76
GR530 249 400 190 217 240 200 145 144 184 76
GR750 249 400 190 217 240 200 - 144 - -

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download