• Not for lifting

General
Pulling force 500 - 1800 daN
The use of aluminium alloy castings provide a lightweight, corrosion resistant unit for pulling and tensioning applications. The double interlocking pawl system ensures safe function, all load bearing shafts are mounted on prelubricated bearings to reduce wear.

Features:

  • All springs and shafts are manufactured from stainless steel.
  • The lifting medium is a non-twisting, galvanized, special steel wire rope.
  • The hooks are fitted with safety latches and are free to rotate 360°.
  • The cable puller LM can be used in single or double legged configuration. In double legged configuration the pulling force is doubled and the wire rope length is halved.



 

  • Note: The units may only be used for pulling and tensioning. Lifting and lowering of loads is not permitted.
    Yale LM cable puller
    Yale LM drawing
    Select a row from the table below, then click the add to quote button
    Model Lever length
    mm
    Rope diameter
    mm
    Hook opening
    mm
    EAN-No. 4025092* 1 legged design Pulling force daN 1 legged design Hook path m 1 legged design Headroom
    mm
    2 legged design Pulling force daN 2 legged design Hook path m 2 legged design Headroom
    mm
    Weight
    kg
    115 DV-B 420 4,8 22 *077293 500 4,6 550 1 000 2,3 700 4,5
    202 WN-VB 520 4,8 22 *077309 500 6,0 525 1 000 3,0 690 5,2
    434 WN-VB 530 4,8 22 *077316 500 9,0 550 1 000 4,5 710 5,8
    S 404 WN-VB 635 6,4 22 *077323 900 5,2 575 1 800 2,6 720 5,9
    S 434 WN-VB 530 5,6 22 *077491 700 6,0 565 1 400 3,0 725 6