General:
Electric winch for lifting and pulling of loads from 150 up to 2000 kg.
A economical range of electric winches designed for simple lifting and pulling operations for example: simple freight lifts, lifting doors, hatches, etc.

Technical properties:
- 2 versions available. Direct control (type CD), used only with weather protection or low voltage control (type BT), assuring user protection against electric risks.
- Steel rigid structure.
- Up-down pendant control with emergency stop, cable 3 m long.
- Single phase 230 V motor brake with permanent capacitor - 50 Hz lifting type, P = 0.75 or 1.1 kW depending on the models. Class F. IP 54 protection.
- Three-phase 230/400 V motor brake - 50 Hz lifting type, P = 0.75 – 1.1 or 2.2 kW depending on the models. Class F. IP 54 protection.
- Reducer in oil bath with helical gears.
- Mechanical welded steel drum with wide flanges allowing a secure fastening of the wire rope.
- Limit switch as standard (except three-phase CD).

Optional:
- Rope-press roller.
- Grooved drum.

Product Image 1
Product Image 2
Select a row from the table below, then click the add to quote button
Type A
mm
B
mm
C
mm
Ø D
mm
E
mm
F
mm
Ø G
mm
T
mm
PRIMOCD 300 kg 420 422 (2) 216 89 250 214 (3) 9 257
PRIMOBT 300 kg 476 422 216 89 250 214 (3) 9 257
PRIMOCD 500 kg 420 430 (2) 216 95 250 214 (3) 9 257
PRIMOBT 500 kg 476 420 216 95 250 214 (3) 9 257
PRIMOCD-BT 1000 kg 610 565 390 152 292 350 22 312
PRIMOBT 1000 kg 610 565 390 152 292 350 22 312
(2) On the three-phase version (no limit switch), dimension B is 352 mm.
(3) 2 fixation holes are available at half length, i.e. 107mm.